F-one Hydrofoil Parts

Cedrus Fuselage Adapter Project Cedrus is the only fully universal hydrofoil mast thanks to the use of precision machined adapters which have been refined since the original introduction in 2019. Precision machined in the USA from 6061-T6 aluminum...

Cedrus Aluminum Mast Complete Includes: Aluminum Mast Fuselage Adapter Top Plate Aluminum Mast  Sizes Available: 70cm 80cm 90cm The stiffness, strength, and compatibility of Project Cedrus now available on demand and at a much...

Cedrus Aluminum Mast **MAST ONLY, DOES NOT INCLUDE ADAPTOR OR MOUNT** Sizes: 70cm 80cm 90cm The stiffness, strength, and compatibility of Project Cedrus now available on demand and at a much lower price. The aluminum mast has been engineered to...

FUSELAGE CARBON XX-SHORT The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired...

FUSELAGE CARBON X-SHORT The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired...

The NoLimitz Foil Mast No Compromises. Stiffer. Lighter. Faster. Stronger.  After 30 years of producing high quality carbon fiber aerospace parts, Innovative Composite Engineering is proud to offer the...

4-POINT FOIL MOUNT ADAPTER The 4-point foil mount adapter is specifically designed to work with the ROCKET AIR’s 4-point system. This adapter lets you mount any top plate to the ROCKET AIR, and thus allows you to ride this board with any foil on...

STAB C250 SURF HM The surface and shape of the C250 SURF HM stabilizer have been thought out to best deploy the power and ability of the PHANTOM CARBON S range and the PHANTOM CARBON 980 and 1080. Sharp and precise, it allows you to gain speed...

STAB C275 SURF The C275 SURF stab is specifically designed for carving and pumping. Its flatter arch shape delivers high efficiency while pumping to connect more waves. Its shape and smaller area ensure sharp turns and more speed with a very...

STAB C200 CARVING The C200 CARVING stabilizer is designed for high speed carving on any waves, and increases the maneuverability of the entire plane. Its aspect ratio of 6.8 and thin profile bring a significant speed and glide potential to each of your...

STAB C195 SURF Our C195 SURF stab has an aspect ratio of 5.8 and a thicker profile, providing the perfect amount of speed control and allowing tight turns in the pocket with a snappy feeling. Snappy turns and reactive surf Anhedral wing...

STAB C220 SURF Fast and agile, the C220 SURF stabilizer provides a fantastic glide and a lot of freedom when riding. Fantastic glide Complete turning freedom Constant balance for perfect control Easy to turn and roll from rail to rail, it is a...

STAB R275 SURF The R275 SURF stab is specifically designed for carving and pumping. Its flatter arch shape delivers high efficiency while pumping to connect more waves. Its shape and smaller area ensure sharp turns and more speed with a very loose...

STAB DW 210 HM Astoundingly thin and flat, the DW210 HM stabilizer was built for speed. Its high aspect ratio will offer incredible glide at high speeds and will help you stay up and flying above the water endlessly. This stabilizer will not only...

STAB C250 FENCE HM The C250 FENCE HM stabilizer has been specifically designed to enhance maneuverability through the addition of fences on the wingtips. This stab is also incredibly stable while upwind or yawing and will delay the stall of the foil...

F-One Aluminum Mast - 75cm The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years...

F-One Aluminum Mast - 95cm 85cm Ideal For Wind Foiling The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its...

F-One Titan Mast Foot The TITAN mast foot is the connecting part that makes the F-ONE aluminum masts compatible with all TITAN fuselages and wings. It is made of 6061 aluminum, CNC machined with high precision and fully anodized. To install the TITAN...

F-One Aluminum Mast - 85cm 85cm Ideal For Wind Foiling The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its...

F-One Mast Top Plate The Mast Top parts are machined out of solid blocks of 6061 aluminum. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the...