Mounts & Adaptors

Cedrus Fuselage Adapter Project Cedrus is the only fully universal hydrofoil mast thanks to the use of precision machined adapters which have been refined since the original introduction in 2019. Precision machined in the USA from 6061-T6 aluminum...

Axis Mast To Cabrinha Wing DooDad An adapter which fits on your Axis Aluminum Mast to allow you to run a Cabrinha Front Wing.   Note: Not all wings have the exact same dimensions in the mast connection. If it takes excessive force to fit the...

Axis Mast To Unifoil Wing DooDad An adapter which fits on your Axis Aluminum Mast to allow you to run a Unifoil Front Wing.   Note: Not all wings have the exact same dimensions in the mast connection. If it takes excessive force to fit the...

Axis Mast To Lift Wing DooDad An adapter which fits on your Axis Aluminum Mast to allow you to run a Lift Front Wing.   Note: Not all wings have the exact same dimensions in the mast connection. If it takes excessive force to fit the adapter...

2022 Slingshot Phantasm Aluminum Wide Body Mast to Fuselage Adapter Attach your wide body Phantasm mast to your Phantasm fuse.

Stringfellow Adaptor Plate Ever been frustrated with the lack of compatibility between foils and boards? Us too, and we finally have a solution for you! This plate is designed to accommodate a fixed foil mount board. If you have an inflatable F-one...

Custom Moses Super-Fuse Surf Fuselage Due to the overwhelmingly positive response to our 710 Superfuse, we have added an 880mm Superfuse for Wing Foiling, Sup Foiling, and Windsurf foiling. The longer length matches the larger boards responsiveness...

2022 Slingshot Hover Glide Aluminum Mast to Phantasm Fuse Adapter Have a Hover Glide mast and want to get into the new Phantasm platform? This mast-to-fuse adapter is your answer.

Slingshot M8 Foil Track Nut Stainless Steel Stainless Steel Foil Board Track "T" NutM8 ThreadSold as 1 each  

Slingshot Foil Hardware Kit Need a spare set of foil hardware for when your husband INEVITABLY loses the one he has? Look no further.    Hover Glide hardware pack for your foil spare and backup needs. Better safe than sorry! pack...

FoilMount 3.0 Carbon New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner than the original FoilMount.  This setup weighs just...

Trim Shim Stackable Hydrofoil Shimming System **Hardware ONLY.  Ratchet Wrench NOT included** The TrimShim stack-able hydrofoil shim system comprises of a set of specially made abs shims that lock-in to one another creating a stack-able shim...

Wizardhat Universal Hardware Set Sizes: 25mm (designed for FCT) / 35mm This hardware set will work with any base plate or 4-bolt tracked board on the market.  This included M8 or M6 base plates and tracks.  There is no more need for T-nuts or...

NSI Surface Mount Insert Plates Set of 2 Looking to attach something to your foilboard? The NSI Surface Mount Insert Plates feature a strong adhesive backing or with screws (washers sold separately).  What NSI has to say about the Mount Insert...

FoilMount Ridge Mount The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have.  The FoilMount uses a specially designed 3M adhesive tape to stick to the...