Parts by Brand

Axis Ti Link Titanium Fuselage Size: 270mm What Axis has to say: Strength You Can Feel, Precision You Can Trust Every evolution in foiling starts with connection, and the Ti-Link sets a new benchmark. The result is a fuselage built from aero-grade...

Axis TEMPO UHM Carbon Front Wing Sizes: 890 / 920 / 960 / 1020 / 1090 What Axis has to say: Tempo is the ultimate weapon. The Tempo foil range is not a simple upgrade - it’s a revolution and a brand-new approach to foil riding. As we push the...

810X-Series Front Wing Sizes: 810X Surf-First Foil Wing The Code 810X is the first foil in the highly-anticipated X Series. Experience tighter turns, more critical lines, and better control at high speeds. As Tucker puts it, "it's a surf weapon." With a...

Supplied with cover Specs: Overall length long/short (mm) Construction Weight 680/650 HR Carbon monolithic 0.6 kg Features: Smooth ride Two stabilizer positions Customization and intercompatibility New connection Program: All

All Terrain performance - Screws and cover included Developed with Gwen Le Tutour, expert rider and renowned coach, the Enduro 1600 GLT was born from a precise design brief, crafted to support riders of all levels. Thanks to Gwen’s field experience...

Designed for advanced riders looking for speed and maneuverability. The RS975-X is ideal for winging in windy conditions or small wave towing. A versatile foil to meet all surf foil needs. A wake foiling must have for advanced riders!Dimensions:Wingspan:...

These are Rubber pieces that go into the tracks of a hydrofoil board to keep the hardware from falling out.  These new F-One rubber stoppers prevent the T-Nuts from slipping out of the Twin Tracks when they're not attached to your foil. This set of...

The Monobloc Tail PUMPING XXS 200 offers exceptional pumping abilities and a fantastic glide. Aspect ratio: 7.6 Made for dockstarts and endless pumping sessions Monobloc construction for better stiffness and reduced turbulence The Monobloc construction...

ElCapitano Wing Series is a new line of hydrofoils designed to redefine your riding experience, optimized for speed, glide, predictability, and effortless wingtip breaching. Drawing inspiration from the success of the mid aspect ratio Flight Attendant...

ElCapitano Wing Series is a new line of hydrofoils designed to redefine your riding experience, optimized for speed, glide, predictability, and effortless wingtip breaching. Drawing inspiration from the success of the mid aspect ratio Flight Attendant...

These stabs have been carefully designed to go perfectly with your ElCapitano front-wings, but are also compatible with our FlightAttendant series. 180cm This stabilizer was meant to fly with the larger sizes of ElCapitano (995 and up), where maximum...

Our Reedin fuselage uses a conical box-style connection. This means that the tension from the screws when you tighten them is transferred to the four sides of the box to deliver absolute mast/fuselage rigidity. The angle of the side walls have been...

The new Reedin carbon mast comes in at 85cm and is made from ultra strong and stiff pre-preg carbon, it also benefits from our “I beam” construction. Thanks to it’s center web connecting the two surfaces, it allows for a very stiff mast...

The S145v2 is designed to provide the fastest, loosest surfing feel. Its anhedral rondure loosens up the front wing in the roll axis, while the foil sections ensure predictability and a broad speed range. Its moderate span creates an aspect ratio high...

We’ve designed the S122 Glide Stabilizer for lighter and intermediate to advanced riders to use in big, clean conditions where speed and glide are a priority. Its small size and high aspect ratio (11.2) unlock maximum speed and glide from the front wing,...

This high-end, one-piece design is crafted for unparalleled performance and control. Featuring a slim, low-drag profile, it ensures playful and precise turning with exceptional rigidity and maximum speeds. Each size of the Mast Slim 2.0 D/LAB is...

Our D/LAB mast combines a slimmer profile with a stiffer layup made with a special blend of high modulus Carbon fibres for ultimate performance, speed and direct response. Due to its thinner structure these masts are only recommended for wings up to...

Introducing a new addition to our Foil Line-Up for 2025 - the Hyperglide D/LAB, the pinnacle of performance for Downwinders, designed to deliver unmatched efficiency and speed. Developed for pure downwind performance in faster bumps and ocean swells,...

SUP downwind - Expert / Wing foil DW Already a proven winner in prestigious downwind SUP foil races, including the 2024 Moloka’i to O’ahu (M2O) under the feet of team rider Edo Tanas, the MOMENTUM is tailored at downwind experts and fanatics...

Keep this mini Torx T40 Screwdriver with lanyard in your pocket or on your key ring for fast foil or handle setup changes and tightening. Compatible with the Sonar Foils and ShiftLock Modular Track System. WARNING: Adjustments your foil setup in the...

If you’re into pushing the envelope in Prone, SUP or Wake these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected surf experience? Our new Black Advance+ fuselage configuration is for you. This...

The AXIS PNG 1300v2 boasts low stall speeds, lower drag, better acceleration, better turning and a significantly higher top-end speed – thanks to its finely tuned High Camber (High-lift) / Low-drag foil section. The 1300 v2 has reduced surface area...

Complete F-One Foil Hardware Kit **Does NOT Include Track Mounting Hardware** What's Included: recessed star- (8) M6x25mm recessed star- (3) M6x30mm recessed star- (2) M6x15mm recessed star- (4) M6x14mm

Based on our entry friendly Glide 2145, the Amp SLS comes with the same span of 143cm, but in a higher aspect ratio, shorter chord length and thinner profile, reducing drag and adding performance and pumping speed. The 1750cm2 surface area is not very...

The Whizz SLS features a mid-aspect ratio of 8.5, enough to balance efficient pumping capabilities with maneuverability. Its straight outline with zero sweep maximizes lift-to-drag ratio, enhancing pumping efficiency. The wing's unique appearance,...

Imagine a shorter version of the AXIS 460 rear wing, with winglets. That's exactly what the 420 carbon rear wing is. Our fastest rear wing to date, at 420mm wingspan, 60mm chord, and 8.7 Aspect Ratio. FAST. And with the winglets it provides good turning...

**NO RETURNS**

Who It's For:Don't want flag screws with your RapidTrack Aluminum Mast System? Replace them with these M6 Torx Screws. These screws are only compatible with M6 T-nuts. Package Includes:4 x SS M6 x 25mm Flathead Torx Screws

The following are included in our Screw & Key Set: Torx Key for M6 2 x M6 14mm Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6 18mm Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6 22mm Countersunk 316 grade Torx drive...

The Monobloc Tail Carving W XS 161 and Monobloc Tail Carving W XS 141 are made for wingers who are looking for higher speeds and more powerful carves. Thanks to their new profile, reduced surface area and longer fuselage, they provide the best possible...

Impossibly thin. Impressively fast. We’ve reduced the thickness of the submerged portion of our new High Modulus Prepreg Carbon masts by over 15% compared to our standard Carbon masts, while also increasing both bending and torsional stiffness. The...

Designed for effortless take-offs at low speed, with high top-end speeds to keep up with faster swell. The wing is maximised for low drag and longer glide while retaining the manoeuvrability required to navigate downwind swell. The foil is shaped for...

Mid Aspect Front Wing An evolution of the Reflexed Series, our larger MAv2 Series wings deliver a stable learn-to-foil set-up designed for winging and boat foiling. Pitch stable across the entire speed range, the MAv2 Wings feature controllable early...

For Wings with ShiftLock Modular Track Mounting System The ShiftLock Action Camera Mount lets you use a camera attachment on the front or the rear of the Wing - no more struggling to mount cameras onto handles; with this system, you snap your camera...

Our Aero AL set is a solid base for everyone getting into the sport looking for a long lasting mast & fuselage set that gets you far into all disciplines of Foiling. You’ll be able to grow and update your quiver with new wings, forward and...

Our Aero SLS masts in combination with AL 3BS fuselages are amongst the strongest setups you can ride, while keeping the weight low. With incredibly high structural strength in both torsion and bending loads, the SLS masts offer incredibly direct...

North Multi Tool For quick, effortless gear changes? Features: Torx T40 for Sonar Foil Hardware Adjustment P3 Phillips Head Screwdriver Tool for Footstrap and Binding Adjustment Compatible with North Kiteboarding and Sonar Foil Hardware? Ergonomic...

North Sonar Session Saver Box A convenient toolbox full of Sonar Foil hardware, recommended for all foilers.? Features: All Titanium screws and T-nuts? Torx T40 Tool included Never lose a screw? Convenient storage for all your...

North Foil & Bindings Tool Kit Always ready. Always Prepared. Here's everything you need in one box. This large, double-sided Toolbox – one side Foil, the other Board & Bindings, is future-proofed with empty compartments, so you can restock...

With a thin profile and higher aspect ratio, this Carving range is the way to go if you need speed and maneuverability. Using the Monobloc Tails will provide a looser, more snappy feeling, as well as a faster pumping pace. The monobloc construction...