null

Hydrofoil Hardware Finder

It can be confusing trying to keep track of which screws go where on your foil setup, let alone figure out what you need to replace the one that fell in the sand and disappeared forever. We know... we've been there! That's why we did the legwork for you and put this chart together. Just find your brand, then the part you need hardware for, and click the link to take you to the page where you can get more. We'll do our best to keep it updated, but if what you need isn't here, give us a shout and we'll look it up for you.

Speed Front Wing M8 x 27mm Hex Recessed Screw
Lift Front Wing M8 x 27mm Hex Recessed Screw
Carve Front Wing M8 x 27mm
M8 x 40mm
M8 x 45mm
Varial S, M, L Front Wing M8 x 25mm
M8 x 35mm
M8 x 38mm
Speed, Lift Stabilizer M8 x 14mm Hex Recessed Screw
Carve, Varial Stabilizer M8 x 20mm Hex Recessed Screw
Mast (both ends) M8 x 40mm Hex Recessed Screw
Plate to board M8 x 25mm Hex Recessed Screw

Back to Top

Daytona Coming soon — contact us for the exact spec
GT Coming soon — contact us
Freeride Coming soon — contact us
Carve Coming soon — contact us
Surf Coming soon — contact us

Back to Top

Mast plate M6 x 25mm Hex Recessed Screw
Mast foot to mast M6 x 25mm Hex Recessed Screw
Split fuse to tail M6 x 25mm Hex Recessed Screw
Stabilizer M6 x 16mm Hex Recessed Screw
Carbon fuse to titan M6 x 32mm Hex Recessed Screw
Alu fuse to mast foot M6 x 25mm Hex Recessed Screw
Board M6 x 25mm Hex Recessed Screw

Back to Top

Standard Aluminium top plate to board M6 x 25mm Star Recessed Screw
Abracadabra Top Plate to board
Carbon Top Plate to board
M6 x 30mm Star Recessed Screw
Mast (both ends) M6 x 30mm Star Recessed Screw
Wing and Stabilizer M6 x 20mm Star Recessed Screw

Back to Top