How to Put a Cabrinha Fireball Spreader Bar on a Mystic Harness

Hi guys, it’s Tucker from MACkiteboarding.com and today I’m going to show you how to connect a 2017 Cabrinha Fireball spreader bar to a Mystic Warrior harness.

First thing you’ll want to do is take your quickloop clip and connect it to the harness.
Find the right side of the harness - this HAS to go on the right side of the harness - and we have a fat strap and thin strap there, fat strap first.
We’re going to go up through the big slot on the clip and then down through the second big slot. Bring that back to the fat strap and feed it all through.
For the second smaller strap, we’re going to go through the lower slot and back to the harness loop. With the other side, notice this is the left side now, they also have a large and small strap.
We’re going to connect the spreader bar assembly. The hook will go upwards, not downwards - the opposite of what you’re used to with the quickloop.
We’re going to go through the farthest big slot here and back through the other slot, then back through again.
Finish up that strap by doing the same, then cinch tight.
With the small strap, we’ll go through the lower slot and back to the strap cleat.
Now, all you have to do is click together then get ready to ride!

3rd Aug 2016 Tucker Vantol