Budget Wing Foil Package

MAC's Take On The Package

We understand getting into a new sport can be expensive and intimidating. So we are doing our best to beat back those intrusive thoughts and help with a digestible price on some great, reputable gear. Why should a bit of cash hold you back from having the time of your life, right? This is legitimately the best value we can muster and you'll be hard pressed to find a deal like this again. So act fast before it's gone.

The Mantis wing offers smooth flying and light weight performance. The Compact board gives a high level construction that's more stow-able than most for easy storage and transport. The FCT foils deliver legendary F-one design in a super durable and up-grade-able pack to help you progress quick and without compromise. 

*we suggest sizing up on the compact board for more stability. If you are on a cusp of sizes, go larger.

What's Included:

• Naish Hover Wing Foil Compact LE Board
• Cabrinha Mantis Wing
• F-One FCT Foil

What board size is right for you?

One question on every new winger’s mind is how many liters do I need in my wing board? Will it float me? Can I get away with a smaller size? Can I get one board to learn on that is small enough that I will never want to upgrade? The below chart provides a general framework for sizing your board based on weight and experience.

For more information, make sure to check out the two blog posts below:

Will it Float? A Beginner's Perspective on Wing Foil Board Size

What Size Wing Foil Board is Right For You?

Which wing size is right for you?

As a general rule, a rider under 150 pounds should start with a wing around 4 square meters. For riders over that weight, a 5 meter wing will be a better place to start. This is very much an average - if you're riding in lighter winds or want more power, you'll want to go with a larger wing. If you're a light weight rider or winging in high winds, you'll want to go with something smaller. 

If this is your second wing and you are looking for consistent, high performance across the whole wind range, it's smart to separate your wings by 1M increments for most models. That will ensure you are going to have a wing that is properly powered no matter what the wind is reading.

Perhaps you are looking to make each wing maximize its wind range, then a 2m gap works well until you get below 4m. At that point, you'll want to go to 1m gaps due to the exponential power of wind at higher speeds. Using this method, you'll have times where you are overpowered or underpowered at times depending on the range of wind and the sail you chose but it will help you maximize your range using fewer wings.

For more information check out these blogs from our Knowledge Center below:

Wing Sizing Broken Down: Which Wing Size and Model Is Right for Me?

3 Things to Consider When Buying a Wing Foiling Hand Wing

Detailed Package Overview

Wing Board Model and Specs

Naish Hover Wing Foil Compact LE

What Naish has to say

Our new Hover Wing foil LE range is designed to reduce swing weight to an absolute minimum while still offering stability and ample volume for their size. These boards are targeted for riders who already know how to foil and want to ride the shortest board possible. These boards, are about 15% shorter at a comparable volume to the Hover Wing Foil Carbon Ultra line. The reduced swing weight makes them feel more maneuverable. The compressed volume distribution is focused to the main stance area, still making it easy to get started. They require a bit more skill to get up on the foil than the Hover Wing Foil Carbon Ultras and are more sensitive when it comes to for and aft balance.

AT A GLANCE

• Ultra compact foilboards for winging and SUP foiling
• 15% shorter than our Hover Wing Foil Carbon Ultra line
• Lightweight carbon wood construction
• High gloss deck and rail nish
• 3K carbon tail reveal

3K CARBON/WOOD CNC EPS CORE CONSTRUCTION

• Lightweight CNC cut EPS core
• High density deck-to-bottom foil track system with carbon reinforcement
• Full 3K carbon deck with wood sandwich and double wood in the stance area
• 3K carbon reinforced wood sandwich bottom
• Kevlar reinforced rails
• Carbon strip bottom stringer

Wing Details and Specs

Cabrinha 02 Mantis Windowless Wing

With some awesome upgrades for the second version of the Mantis and a good price point to match, you can't steer wrong with this wing. Utilizing a windowless canopy for easier packing, traveling, and storage, the Mantis is a solid wing for all-round conditions for anyone from a novice to an experienced winger.

Rigidity is the focus of this year's improvements as well as an adjusted wingtip shape adjustment for easier water starts.

Foil Details and Specs

F-One Phantom FCT Complete Foil

The PHANTOM FCT foils are reliable, easy-to-use, and well-balanced, bringing riders substantial room for improvement. With their newly reinforced fiberglass construction, these foils are accessible and intuitive, designed to glide effortlessly when pumping or connecting waves, and to be precise and maneuverable when wing foiling or surf foiling.

• Aspect Ratio: 6.0
• A great all-around foil to get you into any foiling discipline
• Accessible, well-balanced and maneuverable
• Smooth take-offs and progressive acceleration
• Easy pumping to get you flying in no time
• Ideal for beginners and intermediate riders who want to perform and progress even further.

Features:

• FOIL COMPRESSION TECHNOLOGY - The Foil Compression Technology is a F-ONE innovation offering impressive mechanical properties, making it particularly suited for foil subjected to high stressed and bending loads.
• FUSION LINK - The Fusion Link enables the perfect connection between the fuselage and the front wing using a large solid plate at the front of the fuselage.
  It is screwed to the front wing using 4 x M6 – 14 mm screws, resulting in a connection geometry that ensures a very solid and stiff assembly.
• ALUMINIUM 6063 & 6061 - This aluminum alloy boasts some very good mechanical properties and can be processed in many ways while also offering a natural resistance to corrosion.Produced from an extrusion process, our aluminum profiles make the most of this homogeneous material to provide perfect stiffness both in torsion and bending. All areas in contact with other metals or carbon parts are duly isolated against galvanic reactions.Machining blocks of aluminum 6061 guarantees the maximum accuracy and preserves the mechanical properties of this higher grade of aluminum. All parts are fully anodized and stainless-steel inserts are fitted with insulating gel when fastening is required.