Omen Emissary X Code S-Series Foil Package

Omen Emissary X Code S-Series Foil Package

Wing Foiling / Surf Foiling / Parawing / Dock Start

Sizes: Board: 28L, 35L, 44L, 55L, 66L, 78L, 90L, 105L | Foil Plane: 720S, 850S, 980S, 1130S Hi-Mod, 1300S Hi-Mod, 1540S, 1725S | Mast: 75cm, 80cm

Pairing the refined wave-riding hull of the Omen Emissary with the high-lift efficiency of the Code S-Series foil plane gives you a balanced, highly responsive setup built for connected wave carving and lightwind gliding. The Emissary board delivers instant takeoff speed and smooth touchdown recovery, allowing you to downsize without sacrificing low-end performance. Matched with Code's parallel extruded aluminum mast and smooth-lifting S-Series front wing, you'll experience predictable drive through tight carves and white-water sections. In this package, the Omen Emissary X Code S-Series Foil Package provides a stiff, efficient platform to help you push your limits in wave and lightwind conditions.

What Omen Foils & Code Foils have to say:

The Emissary is designed as a wave riding instrument for foilers seeking to push their connection with the ocean's energy. Along with a gain in length and reduction in width, the hull shape has been optimized for high efficiency at takeoff, providing the ability to downsize your board without loss of low end. The smaller sizes excel in high-performance wing and prone setups, while the larger sizes are tailored for low-powered sail conditions, parawinging, and super lightwind winging.

The Code S-Series foil plane delivers early, smooth, and predictable lift across all disciplines. Designed with a mid-to-high aspect ratio and a high-lift foil section, the rider can drop down in foil surface area to gain maneuverability, efficient glide, and smooth pumping through turns. When pushed in critical wave sections, the wing tips breach with control and navigate out of white-water sections with stability underfoot.

Who is this for?

This package is built for intermediate to advanced wingers, prone foilers, and parawing riders who want a dedicated wave and lightwind foil setup. It suits foilers looking to downsize their board volume while maintaining early takeoffs, efficient glide, and precise rail-to-rail control.

Design Profile:

A narrow, hydrodynamically efficient wave board paired with a high-lift mid/high aspect carbon foil plane and a rigid extruded aluminum mast system.

Performance Features:

• Smooth Touchdown Recovery - Narrower hull profiles and progressive rear chines offer forgiving impact recovery and high bank angle clearance.
• Early Smooth Lift - S-Series wing section provides predictable low-speed lift and smooth, controlled tip breaching in turns.
• Stiff Aluminum Connection - Parallel extruded aluminum mast stem with custom top socket and base plate eliminates play for direct power transfer.
• Minimized Swing Weight - Reduced volume in the board nose and tail paired with high aspect wing profiles keeps turning initiation fast and nimble.

How does it compare?

Versus the Omen Flux:

The Emissary features a narrower hull, longer relative length, and increased takeoff efficiency compared to the Flux. This shape allows you to size down one level in board volume (e.g., 60L Flux to 55L Emissary) while keeping low-end planing capability. The Emissary focuses strictly on wave riding, prone, and lightwind parawinging efficiency and omits footstrap inserts to keep weight at a minimum, whereas the Flux offers footstrap versatility for jumping and freestyle.

Design Features:

• Zero-Rocker Deck - Flat standing area with full coverage deck pad and aggressive concave provides a comfortable, locked-in feel for strapless riding.
• Steep Rear Chines - Chines become steeper toward the tail, reducing straight-line drag during takeoff and providing clear rail release on banked carves.
• Low Drag Carry Handle (78L Size) - Features a built-in FCS II box with a mini G10 fin that doubles as a lightweight, reversible carry handle to keep the board balanced across various mast positions.
• Full Carbon Construction - Built at the Appletree factory in Portugal using vacuum resin infusion over a CNC-cut closed-cell foam core to prevent water absorption if damaged.

Tech Specs:

• Closed-Cell Foam Core - 100% waterproof CNC-cut core bonded with full carbon lamination prevents water ingress even if the outer skin is punctured.
• Extruded Aluminum Mast Section - Features a 120mm chord and 18.7mm profile thickness engineered for high flexural and torsional rigidity.
• High Modulus Option (1130S & 1300S) - High modulus carbon construction in select larger wing sizes provides additional stiffness for heavier riders and high loads.