2020 Ocean Rodeo Roam Kite

(No reviews yet) Write a Review
  • 2020 Ocean Rodeo Roam Kite
  • 2020 Ocean Rodeo Roam Kite
  • 2020 Ocean Rodeo Roam Kite
  • 2020 Ocean Rodeo Roam Kite
$1,069.00 - $1,619.00
Frequently bought together:


 2020 Ocean Rodeo Roam Kite

2020 Ocean Rodeo Roam Kite


5m / 6m /7m / 8m / 9m / 10m / 12m

Roam Description


Using a carefully selected mix of Dacron and ripstop, we have created a super light yet rugged 3-strut air frame.

Although the Roam's design remains familiar in Gen 3, the kite's flying weight has been greatly reduced (weighing-in lighter than most single strut kites), improving its performance not just in light wind, but in all wind conditions.

The ultra light weight and deep foil profile in combination with a moderate arc provide for sharp, responsive turns, maximum drift, and the low-end hover sought out when freeride foiling, or drifting down-the-line on your surfboard.

With the Roam Gen 3, there is no longer a need to compromise on stability and wind range in favour of no struts.

Roam Attributes

 2020 Ocean Rodeo Roam Kite


Roam Structure


Built for the dedicated wave rider with a moderate arc makes the roam a fast turning kite combined with a large sheeting range.


The Roam's low aspect ratio design and deep foil profile allow for maximum drift and low end power.


3 Strut Frame

The Roam's 3 strut "boxy" frame results in its big lifting wingtips allowing the kite to effortlessly drift down the line while maintaining positive steering with tight pivot turns for ultra fast changes of direction.

The entire frame is built with tested and proven KP-E dacron providing incredible strength, durability, and rigidity. Where our competition choose to reinforce their closing seams with only mark cloth, we use more KP-E because we believe reinforcement materials should be at least as strong as its base.



A fixed short line bridle with a floating V design and a two pulley system creates direct and snappy response while also keeping bar pressure low. New to this generation are larks head loops on front bridles, and knots on the back lines making for an innovative system that stabilizes the leading edge. This allows the Roam to lift out of a loop and avoiding a stall for maximum climb.

Safety System

A single front line flag out system is used allowing the rider to achieve maximum de-power if the trim loop release is activated.

WARNING! It is crucial that the bar you are using utilizes this system.

Note: For Next Gen kites we have changed the bridles on our kites so that the front attachments have loops and the back attachments have knots.

In order to use a previous generation Ocean Rodeo bar with a Next Gen kite, you must first install the OR Bar Bridle Adapter Kit (which can be purchased from a dealer or directly from Ocean Rodeo) to the bridles on the kite. This will change the bridles so that the front attachments have knots and the back attachments have loops. Thus making it compatible with the older model bars.

Roam Materials

Dimension Polyant K-PE Dacron

Dimension Polyant's K-PE dacron utilizes PEN (polyethylene naphthalate) fibers in the warp direction. PEN has a higher modulus than polyester and these fabrics exhibit approximately 30 to 40% lower stretch than their polyester equivalents. This makes K-PE the ideal choice for kite dacron where low stretch is a top priority.

K-PE fabrics are produced utilizing DP's patented X-PLY technique assuring reliable performance and the highest quality lamination available on the market.

Teijin Technoforce D2 Ripstop

Designed specifically for the kiteboarding market, Teijin's Technoforce D2 Ripstop has high tear resistance, low stretch, and is incredibly light weight.

Each Strand of yarn is individually coated before being woven together. A second surface coating is then applied to the material, providing long term endurance.

Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics.

ocean-rodeo-2020-crave-precision-curve-strutsRoam Features

Precision Curve Struts

New curved struts hold the designed foil shape delivering the desired performance through the wind range.


Armortex Abrasion Guard

Ultra-light, non fraying, and abrasion resistant, these Kevlar/ nylon blend scuff protection pads deliver a streamlined no snag profile throughout the kite.


Ultra Lite Construction

We use a blend of state of the art fabrics and components in order to bring to you the lightest and toughest kites we’ve ever made. Using custom blended UV film in our strut and leading edge bladders allows us to double down on light weight with outstanding durability.


Speed Inflation System

Every aspect of our Speed Inflation system has been fine tuned over the years to be low profile, reduce drag, and above all to ensure that you spends less time on the beach and more time on the water.

Featuring all new EVA Clamp covers. See if your clip is open or shut. Light and easy to operate.


High Capacity Valve

Direct hose to valve connection for simple operation. Wide threaded cap is easy to tighten and even easier to unscrew eliminating the jammed valve cap syndrome. Cap is leashed to the kite, and the valve cover has been re-shaped for smooth no snag fit.


Load Distribution

15 years of kite design and manufacturing has taught us more than a few tricks about using strategic seam placement to reduce the stress points between the trailing edge and the canopy. This combined with load distributing reinforcement patches enhance the kite’s performance and durability.


Variable Line Length

Tailor your kite’s performance to match your riding style and launch conditions. Longer lines generate more power while shorter lines increase speed and response. Ultra-short lines provide immediate rider feedback to the kite and a direct, snappy feel with added advantage of simplified line management at tricky launching and landing sites.


Trim Equalizer

Keeps line lengths equal when fine tuning kite turning speed.


Buck Stitching

This three stage zig-zag stitch, combined with 10mm tape, distributes the seam load and creates a tear resistant, long lasting seam.


Easy Access Bladder Port

The leading edge access port has been redesigned. The zip entry access to bladders is neatly finished delivering a super clean entry into the leading edge compartment.


Secure Connect

Molded beads on the back line leaders deliver a secure larks head connection every time.

Quick connect front line connector loops in high-vis orange allow for easy line management.


Secure Pump Leash Loop

Easy to locate and perfectly balanced to hold your kite in place while you pump.



Roam Wind Range

 2020 Ocean Rodeo Roam Kite wind range

 2020 Ocean Rodeo Roam Kite

 2020 Ocean Rodeo Roam Kite

 2020 Ocean Rodeo Roam Kite

 2020 Ocean Rodeo Roam Kite

View AllClose

0 Reviews

View AllClose