2020 Naish Jet 2000 Foil Complete - Abracadabra
What Naish has to say about the 2020 Jet 2000 Foil Complete - Abracadabra:
Surf, SUP, Wake, Kite
Brand new for 2020, The Jet 2000 foil was designed to create the best performing downwind and small surf foil possible. To achieve this the following developments have been implemented:
- All 2020 Jet front wings are newly developed setting a new standard in the combination of lift, turning ability and speed. The Jet 2000 front wing focusses on maximum lift and pumping ability making it accessible for foil downwinders while still being turny enough to be a force to reckon with in small gutless surf or for riders that need that extra amount of lift for weight reasons. Compared to our smaller size wings it has a flatter curve and wider wing span which improves the pumping ability and overall lift. We recommend this foil set for riders who are looking to do foil downwinders, surf in almost non existent waves or heavier riders who are looking for maximum lift.
- The set comes with our Stabilizer 450 which complements the new front wing by adding a dramatic amount of "fore and aft" stability. Its foil, outline and wing tip angles combine that stability with better more stable turning.
- Wing weights have decreased throughout the range along with a new wet sanded finish on all wings to optimize the surfaces for top speed.
- The redesigned fuselage introduces a new fixed back wing connection which increases the strength and stiffness of the wing-fuselage system.
- The front wing connection is modular with previous year models and with an accessory adapter, 2020 stabilizers can be fit for older generation fuselages (2018 and 2019).
- The Jet 2000 foil set comes with a 75 cm mast to maximize downwind foiling and pumping performance.
- All 2020 aluminium masts feature a new finish which combines the accuracy of the sandblasted finish with wet sanded surface optimization for ultimate stability and speed.
- The Abracadabra system comes with all complete Jet foil setups. The system has been optimized by increasing the thread length of the set screw for a stronger connection and tighter fit. A brand new tooless set screw has also been designed that allows users to mount our foils to the board without a tool.
- New Titanium assembly hardware sets all but eliminate any potential corrosion issues. All hardware has also changed from Phillips head to Torx, allowing better leverage without the need to apply as much downward pressure as required by the Phillips head. A Naish Torx T30 driver is also included with every complete foil set.
- Included with each foil set are covers for the front wing and stabilizer as well as a carry case that protects your foil gear when dismantled for storage or travel while also reducing waste from packaging.
A 75 cm Mast
B Surf Fuselage
C Abracadabra Board Mount
D Jet 2000 Front Wing
E Stabilizer 450 Back Wing
F Titanium Foil Assembly Screw Set
(6 x 30 mm M6 Titanium Torx screws - 5 x 20 mm M6 Titanium Torx screws)
G Abracadabra Board Mount Screw Set
(4 x 30 mm M6 Stainless steel Torx screws and 4 x stainless steel T-nuts)
H Foil Covers
I Travel Bag