20% Off - 2019 Duotone Mono Kiteboarding Kite
2019 Duotone Mono Kiteboarding Kite
What Duotone has to say about the 2019 Mono
Light, simple and devastatingly good, the Mono is a fantastic all-rounder that features just one strut and incredible handling!
Completely redesigned and reinvented from scratch, the Duotone Mono is light, simple and devastatingly good. It´s a fantastic all-rounder that features just one strut and incredible handling for entry level, foiling and twintips! If you want a pure, lightweight, do-it-all kite, the Mono is it. This season the whole concept has been questioned and all sizes have been completely redesigned by Ken Winner. Low end and especially high end have significantly been improved and flutter nearly eliminated. With just one strut and very dynamic handling it is sure to excite and the benchmark in one strut kites. In light winds the performance is incredible, not only can the kite fly in the slightest of breezes, but it is also very easy to relaunch too.
- Sits far back in the wind window, backstall nearly impossible - The positioning of the Mono in the wind window has been refined to the max, ensuring the best stability and upwind performance
- Super easy, fast auto relaunch - Relaunching a one strut kite has never been easier and nearly automatic
- Light bar pressure and progressive power development - Bar pressure on the Mono in general is quite light, yet with an exact feedback of power development
- Light and robust one strut design - Best combination of light weight and robustness
- Slick profile with lower aspect ratio and less flutter - Especially remarkable for a one strut kite: Flutter is nearly eliminated
- 4 and 5-line setup - The Mono can be flown both with 4 or 5 line set up
Heavy Duty Leading Edge Closing System
The leading edges of all kites are extremely durable due to a special heavy duty closing seam. The Dacron material at the leading edge is reinforced with a self sticky Insignia Tape and double stitched additionally. The Heavy Duty Leading Edge Closing Seam is resistant to very high tensions and diagonal forces.
This construction allows for a controlled distribution of forces between strut and leading edge. Struts are 100% connected to the leading edge with a flexible Dyneema line, which promotes higher canopy tension and a clean profile.
Self Rescue Handles
The self-rescue handles on the inside of the wingtips can be easily found in case of an offshore break down. They provide a good, comfortable grip while sailing back to the shore during a self-rescue manoeuvre.
The Anti Snag webbing is preventing the lines from tangling around the tip of the kite. Waterstarts are made easier and safety is increased.
Kook Proof Connectors
The kook proof line connection points prevent accidents by guaranteeing that you cannot accidentally connect your lines incorrectly when rigging your kite.
These pigtails distribute the load of the line connections to the kite, minimizing the risk of fatigue, making the kite less prone to distortion and helps it to steer more smoothly.
Trailing Edge Force Control
The Trailing Edge Force Control is responsible for the smooth power distribution between the different materials of the kite, forcing the tensions in the right directions. Since 2013 the waves are higher and wider to eliminate stress points between the Dacron Trailing Edge and the Trinity TX Canopy material. This change in construction reduces fluttering marks and ensures that the material is not wearing out.
Load Distribution Panels
As kite geometry improves, the canopy must continue to resist increasing forces. To spread these forces, Load-Distribution-Panels are used, holding the kite’s shape even under the most extreme loads. In practice this gives a smoother and more consistent performance from the kite in any riding situation.
Teijin is the world’s leading supplier of polyester fabrics and sail materials to marine sports. The combined creative power of Duotone saw the formulation of TRINITY TX. Exclusive to Duotone, TRINITY TX is a 3x2 canopy material, which has proven to be far superior to other canopy materials in terms of durability and dynamic performance.
The 3x2 yarn combination has proven to be the best solution in performance as well as durability, overall superior to any 2x2 or 4x4 yarn solutions. TRINITY TX. Made to stand the test of time.
|Size||MPH||Recommended Line Length|
|5 M||23 - 37||22 - 24|
|7 M||19 - 33||22 - 24|
|9 M||16 - 30||22 - 24|
|11 M||14 - 25||24|
|13 M||11 - 21||24|
|15 M||9 - 18||24|
*For riders around 175 lbs (79 kg). These are guidelines only. Please consult us via Live Chat or over the phone at 800-622-4655 for sizing questions.