2018 Cabrinha FX Kiteboarding Kite
Introduced in 2015 as an advanced freeride/freestyle wind-capturing beast, the Cabrinha FX went back to the drawing board and expands it's capabilities for 2018. Three "modes", found by adjusting the front bridle, allow the kite to morph into a totally different machine. Freeride mode gives the FX a bit more low-end power, allowing the rider to sheet in, sit back, and go - more akin to the Switchblade. Kiteloop mode is almost identical to the previous version of the FX - fast, nimble, and fun, with a great balance of power and agility. Freestyle mode is for those looking to get the most slack out of their kite, perfect for handlepasses.
The entire lineup of 2018 Cabrinha kites has been updated with High Tenacity Dacron, a canopy material specifically designed with inflated kite structures in mind. Slight modifications of each canopy design have been made to accommodate this new high-performance material, selected for many reasons. It has a tendency to return to it's original shape much faster than other dacron, making for a much "snappier" feel when turning the kite. Additionally, it shows much greater resistance to wear over time.
2018 Cabrinha FX Overview w/ Nathan
There’s a bunch of design changes that have been made for the 2018 FX that are marked improvements over the 2016/17 models. This is pretty hard to do, as the FX was already one of our favorite kites for freeride and advanced freestyle. Cabrinha has increased it's capabilities. Read Nathan's overview, here...
360 view: Drag to rotate, scroll to zoom
What Cabrinha has to say about the 2018 FX
For riders that mix hooked and unhooked freestyle tricks and like to kiteloop. The wide wind range offers more versatility than a traditional "C" shape, and offers smooth power delivery with predictable handling. The FX is designed to bridge the gap between advanced freestyle and performance freeride kites.
- New design for 2018
- New High Tenacity Dacron enhances the arc stability
- Explosive pop and great hang time
- Incredibly quick and nimble handling great line slack for unhooked riding
- Forward pull for kiteloops
- Excellent for vertical boosts
- Smooth power delivery
- More drive than a traditional C-shaped kite
- Predictable handling
- Quick recovery
- Good upwind performance
Design Profile - 3 Strut, Modified C shape arc, Box wing tip design, Lean entry profile
High Tenacity Dacron
Our all new Dacron is specifically designed for inflated kite structures. The construction of this material is very warp oriented using ultra high tenacity yarns with an increased thread count to combat elongation in the warp direction under high inflation pressures. Lower elongation makes for a more accurate kite with less deformation while in flight.
Pure Profile Panels
The strategically placed panels provide ultimate control over the aerodynamic profiles in the kite. Smooth and stable profile entry. Improved overall kite efficiency, performance, and range. Faster flying through the sky giving you a broader range of performance.
Provides the structure that keeps the kite design true to its intended shape while in flight. The stable frame drives the kite through turbulence with a minimal amount of deformation and has excellent overall de-power. The inflated leading edge introduces the laminar flow of air across the kite's Pure Profile Panels, for a quick recovery if stalled and prevents the kite folding on itself. The inflatable structure reduces the amount of bridling required for stability. It also provides safety by providing some flotation in the water and enables an easy re-launch.
Our exclusive line of high-quality woven fabric has been designed specifically for kitesurfing. The Volae materials are made with accuracy and consistency, and are guaranteed for every kite we make. Our 2DR Double Ripstop material is designed to provide a lightweight, yet durable, canopy with extremely low stretch properties. This translates into a kite with the ability to lock in its intended shape, while remaining ultra-reactive to rider input.
A long, narrow wing generally has a high aspect ratio, where as a short, stubby wing has a low aspect ratio. A high aspect ratio designs makes the kite fly forward and point upwind incredibly well, The lower the aspect ratio design is more responsive and provides a consistent and stable pull.
Upon activation of 1X's single line flagging system the power of a kite is immediately killed and it will rest motionless on the water or land.
Sprint System W/ Airlock
The Sprint inflation systems is the most efficient and easy way to get your kite inflated and deflated quickly. The enlarged Airlock valve quickly feeds air into all of the struts from a single location. The Airlock connection to the Sprint pump requires no special adapters. Once inflated, you can lock off each strut independently to keep your kite's rigid frame, and isolate any accidental strut deflation from the rest of the kite. when the session is over, the entire kite will deflate in seconds thanks to the Airlock valves's large dump feature.
Dynamic arc allows the kites to have two distinct arc shapes. The arc of the kite takes on one shape while flying and another shape while in resting mode on the water. While resting on the water the arc opens up slightly to facilitate an easier relaunch.
Every Cabrinha kite comes with a simple, user adjustable way to choose the power level of the kite. Each rear line "pig tail" connector has three power positions you can connect to. The middle position is the factory recommended position. However, the user can choose to create more power by connecting the knot closest to the kite or less power by connecting to the knot closest to the the rider.
Improves the relationship between the actual canopy area and the "usable" canopy area. A majority of the kite's surface area is working for you in a lifting capacity which also improves speed and upwind performance. The key element is not the flat canopy area and aspect ratio of the design, but the in-flight projected area and projected aspect ratio. Once it takes shape in-flight the power comes from the efficiency, and the efficiency comes from reducing the induced drag of the overall wing by having more usable area focused in the projected power producing section of the wing.
|5 M||25 - 42||28 - 48|
|6 M||23 - 38||26 - 43|
|7 M||19 - 36||21 - 41|
|8 M||16 - 32||18 - 36|
|9 M||13 - 28||15 - 32|
|10 M||12 - 26||13 - 30|
|12 M||10 - 23||11 - 26|
|14 M||8 - 20||9 - 23|
*For riders around 175 lbs (79 kg). These are guidelines only. Please consult us via Live Chat or over the phone at 800-622-4655 for sizing questions.
*Copyright of Cabrinha
The returning Cabrinha 1X with TrimLite Control System sets the standard for simplicity and safety. The lightweight design and fixed length design of the bar allows the rider to keep things simple, while still featuring the exceptional safety system of the Overdrive bars, the QuickLoop.
44cm x 22m - Kite sizes 4 - 11 meters
52cm x 22m - Kite sizes 6 - 15 meters
60cm x 22m - Kite sizes 12 - 18 meters
Back for it's third season, the 2018 Cabrinha Overdrive 1X bar is available with TrimLite depower adjustment, keeping things simple. Featuring a standard cleat and line design, the TrimLite makes adjustment easy and precise. The 2018 model also features a new center fitting with a larger opening and higher degree of turning and a new EVA grip pattern with Finger Bumps.
48-56cm x 22m - Kite sizes 4-18 meters
The Recoil depower setup keeps your trim adjustment quick and easy to access, allowing you to be constantly in control of your power. The 2018 model also features a new center fitting with a larger opening and higher degree of turning and a new EVA grip pattern with Finger Bumps.
48-56cm x 22m - Kite sizes 4-18 meters