2018 Cabrinha Chaos Kiteboarding Kite
|This product is available for pre-order only|
What Cabrinha has to say about the 2018 Chaos
For riders that mix hooked and unhooked freestyle tricks and like to kiteloop. The wide wind range offers more versatility than a traditional "C" shape, and offers smooth power delivery with predictable handling. The FX is designed to bridge the gap between advanced freestyle and performance freeride kites.
- New High Tenacity Dacron enhances the arc stability
- Competition freestyle kite
- Engineered for unhooked moves
- Explosive pop... amazing line slack
- Power through turns for massive kiteloops
- Variable steering options
- Sharp and precise turning radius
- Tuned profiles for quick acceleration
- Excellent wind range
- C-Port (6 line) conversion for arc stability
Design Profile - 5 Strut, technical C-shape arc with C-port arch support lines, Box wing tip shape
High Tenacity Dacron
Our all new Dacron is specifically designed for inflated kite structures. The construction of this material is very warp oriented using ultra high tenacity yarns with an increased thread count to combat elongation in the warp direction under high inflation pressures. Lower elongation makes for a more accurate kite with less deformation while in flight.
Pure Profile Panels
The strategically placed panels provide ultimate control over the aerodynamic profiles in the kite. Smooth and stable profile entry. Improved overall kite efficiency, performance, and range. Faster flying through the sky giving you a broader range of performance.
Provides the structure that keeps the kite design true to its intended shape while in flight. The stable frame drives the kite through turbulence with a minimal amount of deformation and has excellent overall de-power. The inflated leading edge introduces the laminar flow of air across the kite's Pure Profile Panels, for a quick recovery if stalled and prevents the kite folding on itself. The inflatable structure reduces the amount of bridling required for stability. It also provides safety by providing some flotation in the water and enables an easy re-launch.
Our exclusive line of high-quality woven fabric has been designed specifically for kitesurfing. The Volae materials are made with accuracy and consistency, and are guaranteed for every kite we make. Our 2DR Double Ripstop material is designed to provide a lightweight, yet durable, canopy with extremely low stretch properties. This translates into a kite with the ability to lock in its intended shape, while remaining ultra-reactive to rider input.
A long, narrow wing generally has a high aspect ratio, where as a short, stubby wing has a low aspect ratio. A high aspect ratio designs makes the kite fly forward and point upwind incredibly well, The lower the aspect ratio design is more responsive and provides a consistent and stable pull.
Upon activation of 1X's single line flagging system the power of a kite is immediately killed and it will rest motionless on the water or land.
Sprint System W/ Airlock
The Sprint inflation systems is the most efficient and easy way to get your kite inflated and deflated quickly. The enlarged Airlock valve quickly feeds air into all of the struts from a single location. The Airlock connection to the Sprint pump requires no special adapters. Once inflated, you can lock off each strut independently to keep your kite's rigid frame, and isolate any accidental strut deflation from the rest of the kite. when the session is over, the entire kite will deflate in seconds thanks to the Airlock valves's large dump feature.
Dynamic arc allows the kites to have two distinct arc shapes. The arc of the kite takes on one shape while flying and another shape while in resting mode on the water. While resting on the water the arc opens up slightly to facilitate an easier relaunch.
Every Cabrinha kite comes with a simple, user adjustable way to choose the power level of the kite. Each rear line "pig tail" connector has three power positions you can connect to. The middle position is the factory recommended position. However, the user can choose to create more power by connecting the knot closest to the kite or less power by connecting to the knot closest to the the rider.
Improves the relationship between the actual canopy area and the "usable" canopy area. A majority of the kite's surface area is working for you in a lifting capacity which also improves speed and upwind performance. The key element is not the flat canopy area and aspect ratio of the design, but the in-flight projected area and projected aspect ratio. Once it takes shape in-flight the power comes from the efficiency, and the efficiency comes from reducing the induced drag of the overall wing by having more usable area focused in the projected power producing section of the wing.
|7 M||17 - 33||19 - 38|
|9 M||14 - 30||16 - 34|
|11 M||11 - 25||12 - 28|
|13 M||9 - 22||10 - 25|
*For riders around 175 lbs (79 kg). These are guidelines only. Please consult us via Live Chat or over the phone at 800-622-4655 for sizing questions.
*Copyright of Cabrinha
Designed specifically for the 2018 Cabrinha Chaos, the Chaos 1X bar with TrimLite will keep you progressing to the highest level and completely in control. Available exclusively with Quickloop and in a 44cm size, the Chaos 1X bar is developed for some of the top-performing freestyle and wakestyle riding. New for 2018, injected EVA bar ends offer the highest grade durability along with all the comfort you might need. Also new this year, Internalized Rear Line adjusters, a new center fitting with larger opening and higher degree of turning, and a new EVA grip pattern with Finger Bumps.